59280 Armentières
Product successfully added to your shopping cart
Réf :
MAT - Pliers to cut and punch the slate, blade 35 mm
2 in 1 = slate cutting and punching. No breathable dust, no crumbling. Ergonomic and bi-material grip. To cut and punch natural and man made slate max. 7 mm thick.
2 in 1 = slate cutting and punching. No breathable dust, no crumbling. Ergonomic and bi-material...
EDMA
DECHAUSS’ TOUT - Professional telescopic wooden batten remover
Telescopic arm (min. 550 mm / max. 940 mm). Heavy-duty.Bears up to 1 ton pressure.
Telescopic arm (min. 550 mm / max. 940 mm). Heavy-duty.Bears up to 1 ton pressure.
EDMA
STUD CUTTER - Guillotine for metal profiles
For clean and quickly cutting 48 mm rails, edge brackets, T-Shaped with cutting accessories. Time saving. No Noise, No spark, no steel scrap,
For clean and quickly cutting 48 mm rails, edge brackets, T-Shaped with cutting accessories. Time...
EDMA
MAXI RET® 5 BLADES - Effortless swaging tool 5 blades
Pipe crimping tool for all types of metallic pipes. Special for stainless steel pipes up to 0.8 mm. Progressive reduction of the pipe diameter. Swaging up to 52 mm.
Pipe crimping tool for all types of metallic pipes. Special for stainless steel pipes up to 0.8...
EDMA
DUO PROFIL - Section setting pliers for back-to-back studs
Specially designed to crimp back-to-back metal studs. Recommended in case of celling above 2,50 m height. Regular stud-to-track crimping from 90 mm width. Max. capacity : 1 + 1 mm.
Specially designed to crimp back-to-back metal studs. Recommended in case of celling above 2,50 m...
EDMA
HOT KNIFE FOR STYROFOAM, SPECIAL E.T.I.C.S.
To cut neatly EPS / XPS insulation foam without any dust.Blade length : 200 mm.The blade temperature reaches 500°C in few seconds.Power : 190 W.CE certified.Supplied with a plastic case including a 200 mm blade, a metallic brush and a fixing key.
To cut neatly EPS / XPS insulation foam without any dust.Blade length : 200 mm.The blade...
EDMA
SEAM OPENING PLIERS
Seam and gutter opening pliers. Forged steel head. Head length 30 mm. PVC coated handles.
Seam and gutter opening pliers. Forged steel head. Head length 30 mm. PVC coated handles.
EDMA
“UNIVERSAL” SLATER’S HAMMER - Right handed
Hand forged.Left and right bevel.Leather handle.Nail puller.Polished finish.
Hand forged.Left and right bevel.Leather handle.Nail puller.Polished finish.
EDMA
CLIN FIX® - Set of 2 cladding supports
To install overlap cladding (fiber cement, fiber wood or wood) by 1 person alone. It allows to hold plank in position before nailing with overlap of 30 mm. For all cladding from 6 mm to 16 mm thick. Adjustable for different widths of clinkers from 160 mm to 255 mm. Examples of fiber-cement width : 180 mm (Hardie Plank type). 190 mm (Cedral type). 210 mm...
To install overlap cladding (fiber cement, fiber wood or wood) by 1 person alone. It allows to...
EDMA
REBAR GUILLOTINE - Max. bending 16 mm / max. cutting 18 mm
Allows to cut steel rebar (18 mm max. diameter). Double function : cutting and bending. Max. diameter for cutting application : 18 mm. Max. diameter for bending application : 16 mm.
Allows to cut steel rebar (18 mm max. diameter). Double function : cutting and bending. Max....
EDMA
CORNER FIX - Hand tool for fixing metal corner beads
For crimping metal corner bead on outside corner. Nylon tip. Ergonomic design. Replaceable jaws. Easy punching.
For crimping metal corner bead on outside corner. Nylon tip. Ergonomic design. Replaceable jaws....
EDMA
NIBBLEX UNIVERSAL - Power drill attachment nibbler shears
Clean cut without any distortion. Cutting capacity : 0.8 mm : stainless steel. 1.5 mm : galvanised steel, zinc, sheet metal, copper, brass. 2 mm : PVC, vinyl flooring, aluminium 2.5 mm : polycarbonate. Power drill attachment for flat or corrugated metal and PVC surfaces. Speed 300 rpm minimum. Multidirectional die.
Clean cut without any distortion. Cutting capacity : 0.8 mm : stainless steel. 1.5 mm :...
EDMA