Adjustable pedestal for fixed slab terrace - 8 mm - Rinno Plots
Are you thinking of installing a tiled terrace but don't know how to proceed? Thanks to the pedestal for slab, it has never been easier to create a trendy exterior! With the 8 mm fixed pedestal, your slabs are solidly held in place for many years to come. Indeed, the slab terrace on pedestal must rest on a foundation that allows you to have a waterproof, solid and durable terrace at a lower cost. Accessible to professionals and amateurs alike, the pedestal for tilling allows for the installation of a non-raised terrace, in the event that there is no height to catch up on or for the renovation of existing and levelled surfaces.
Simplified site preparation
The preparation of the soil is an obligatory step in the creation of your terrace. It is thanks to this preparation that your outdoor space will be durable, solid and secure. The ground must be flat for optimal stability of the pedestal for terrace. For this reason, a few small changes must be made if your terrace is on grass:
- Start by delimiting the location of your future terrace on pedestals in order to prepare the ground properly;
- Carry out a 15 cm deep excavation, then lay a geotextile felt over the entire surface. This felt is essential to prevent weeds from regrowing between the slabs. In addition to a more aesthetic appearance, you will not have to do any maintenance;
- Spread ternary (concrete mixed with gravel) over 15 cm thick. This will create a draining layer and stabilize the soil.
On the other hand, if your terrace is going to take place on the surface of an old terrace, you will be able to place your pedestals directly on it. This saves you time since the old structure acts as a stabilizing board. Make sure, however, to clean the ground before proceeding with the installation.
Installation on any surface
No matter what type of land you own, the fixed pedestaladapts to grass, soil, concrete and old terrace structures. With this slab terrace on pedestal, your floor must be flat for easy slab-on-pedestal installation. The pedestal for slabis laid on the ground without any fixing! Indeed, given the weight of the slabs, fixing the pedestals to the ground is unnecessary.
This 8 mm high and 126 mm diameter pedestal is a product that is highly appreciated by professionals for the time it saves during installation. Beginners' enthusiasm for the product is due to its ease of installation. With no additional tools or structural work required, the Rinno Plots range appeals to anyone who wants to bring their outdoor project to life.
Easy and quick to install
The laying of the pedestal for slab is practical, fast and within everyone's reach. Whether you are a professional or a private individual, no qualifications are required. Thanks to the ease of installation, your terrace is fully laid in just 3 days!
Simply follow 3 small steps to enjoy its installation for several years:
- After having prepared your ground, check one last time with a spirit level, the perfect flatness of it. A flat surface is required for a longer holding of your slab terrace on pedestal;
- It is now time to lay the pedestals directly on the ground! Each slab must be supported by 4 pedestals at each corner. Each pedestal head is equipped with 4 lugs in order to hold the slab on pedestal and obtain regular and discreet terrace joints;
- For a reinforced terrace, you can add a pedestal under the middle of each slab to consolidate your structure.
Be careful, for a solid and reliable terrace, each tile slab on pedestal must be at least 2 cm thick! Be sure to ask for help to lay the slabs and avoid injury.
Resistant and durable
The pedestal for slab provides optimal support and secures the structure, but not only that! Reusable indefinitely, the tile terrace pedestal is made of polypropylene, an extremely strong and recyclable material. Complying with DTU 43.1 and 51.4, the construction site is carried out in accordance with the rules using high-quality materials.
Each pedestal can support up to 1 ton of load, allowing you to enjoy your terrace as you wish. Resistant to temperatures ranging from - 30°C to + 60°C, the pedestal is not sensitive to atmospheric agents such as frost and UV rays. If your construction is not far from a swimming pool, there is no risk of deterioration since the pedestal is resistant to acid and basic products.
Within everyone's reach, the pedestal provides a solid, secure and durable foundation for an excellent quality tiled terrace.
The installation of a terrace on a pedestal is the easiest and quickest method to set up: follow the assembly steps and build your terrace in less than 3 days!
step 1Determine the required spacing, place the pedestals on the ground, adjust them and check everything with a spirit level.
step Once the installation is level, place the tiles on the head of the pedestals.
step 3Then adjust the height of the pedestals and check everything one last time with a spirit level.
step 4Finally, make the cuts to close the terrace laterally.
Fixed pedestal 8 mm for stone floor, duckboards - Rinno plots
|Warranty||10 years warranty|
|Origin||Manufactured in France|
|Conformity||In compliance with the DTU 43.1 and 51.4|
|Resistance||Resisting the acid and basic solutions, the atmospheric agents, the temperatures between -30°C and 60°C|
|Load||Resisting the test of crushing with load superior in 1 ton|
|Use||Gratings, Carrelage stoneware, Concrete slab|
|Adjustable height||Fix 0.31 in|
|Compatibility with extension||No|
Find all the documents that will be useful to you for the realization of your projects
05/11/2019 Pascal G.
31/07/2019 Patricia ".
24/07/2019 BRUNO V.
02/07/2019 STEPHANE ".
14/06/2019 ANNE ".
12/06/2019 Philippe R.
27/05/2019 Yves" "Jean R.
21/05/2019 Christophe K.