Exterior porcelain stoneware tiles for pedestals for terrace- Waxed concrete grey - Rinno Carrelage
Installing a slab terrace is a good way to extend your home outdoors. The choice of covering is one of the most important steps because it will have an impact on the life span of your tiled terrace. The Rinno range of tiles can be laid on pedestals for slabquickly and easily, saving you money. This method of installation is carried out without the application of grout, making it easier to ventilate and maintain over the years.
Rinno slabs are made of full-body porcelain stoneware and are 2 cm thick. The slabs are square and measure 60x60 cm. When laying terrace on pedestals, slabs with a minimum thickness of 2 cm must be used.
Very resistant, slabs from Rinno Carrelage do not freeze and can withstand significant temperature variations without degradation. Their installation around a swimming pool is easy because the slabs have been treated to resist both chemical attack and the additives used in swimming pools.
The anti-slip property of the exterior slabs is a key element for your comfort and safety. Whether you are walking barefoot or with your feet on the terrace, Rinno outdoor tiles are designed to have a high level of grip. This means you don't have to worry about slipping even when the surface of your terrace is damp or wet.
Furthermore, the color of your slab will not fade over the years: a special treatment has been applied during manufacture to ensure that the original color will last for a long time. Laying a south-facing terrace will therefore not be a problem!
In the interests of aesthetics and practicality, Rinno slabs are slabs with rectified edges, which gives them a flawless appearance. Once you have purchased the slabs, all you have to do is lay them and create your slab terrace on pedestals.
The maintenance of the outside slabs is simply done with water and soap or household products. Use a broom-brush designed for outdoor use and wash the slabs by rubbing them. Finally, rinse everything and that's it!
The method of laying on pedestals for terrace is seamless and thus allows good ventilation of the terrace and the evacuation of rainwater. Lay the pedestals on the ground, add a noise wedge on each pedestal to prevent vibrations and resonance when moving around on the terrace and then apply the outdoor slabs tiles. We also advise you to use a slab carrier tool to lift the slabs and avoid injury as the tiles weigh a minimum of 16 kg.
The installation of a terrace on a pedestal is the easiest and quickest method to set up: follow the assembly steps and build your terrace in less than 3 days!
step 1Determine the required spacing, place the pedestals on the ground, adjust them and check everything with a spirit level.
step Once the installation is level, place the tiles on the head of the pedestals.
step 3Then adjust the height of the pedestals and check everything one last time with a spirit level.
step 4Finally, make the cuts to close the terrace laterally.
Porcelain stoneware tile - waxed concrete
|Origin||Manufactured in France|
|Resistance||Résistant aux écarts de température, aux ruptures, aux attaques chimiques, aux taches|
|Dimension carrelage||60 cm x 60 cm|
|Léger, sûr et facile||à nettoyer, à poser, à vivre|
Find all the documents that will be useful to you for the realization of your projects