You cannot place a new order from your country. United States

adjustable pedestal 90/150 mm for stone floor, duckboards - Rinno Plots


Reference :

Available stock

Best price guaranteed

shipment in 24/48h
Your orders are shipped
Customer service
Our teams are at your disposal from Monday to Friday from 9am to 6pm
D.T.U. Standards
All our products comply with current standards
secure payment
Our site is protected by an SSL certificate
the guarantees

Adjustable pedestal for terrace - adjustable slab - 90-150 mm - Rinno Plots

You don't have to have a lot of money to be able to build the raised terrace of your dreams! Rinno Plots has developed an adjustable pedestal for slab that makes it possible to build a private outdoor space without having to face the slightest constraint. Little effort is required, few tools and little time is needed to lay a slab terrace on adjustable pedestal at low cost. Solid, the foundations support your structure without ever moving a millimeter! To achieve this result, all you have to do is be meticulous during installation to enjoy your terrace for many years to come!


Simplified site preparation

The secret to a solid and durable terrace lies in good ground preparation. The ground must be flat and stable to accommodate the pedestals for many years. There are many different ways to do this, depending on your terrain. If your project is on concrete or an old terrace structure, there is no need to prepare the ground. All you have to do is clean the surface in question and check the flatness with a spirit level. However, if you want to build on grass, you will have to follow some preliminary instructions:

  •          After mowing, excavate 15 cm deep before laying a geotextile felt. This will prevent the grass from growing back and will keep your structure intact without any maintenance;
  •          Add 15 cm of gravel to solidify and stabilize the soil. Check the flatness of the soil one last time before laying the first adjustable pedestal for terrace.

Flat ground is mandatory to lay the foundations of the slab terrace adjustable pedestal. Even if the pedestals are adjustable, a sloping terrace is not pleasant or durable... You may have to redo the work in a few years if the ground preparation is not done properly!


Installation on any surface

The adjustable pedestal for slab is practical as it adapts to all types of terrain! The pedestal is adjustable in height from 90 to 150 mm to meet the needs and requirements of the user. To do this, an adjustment ring is located under the head of the pedestalfor a height selected to the nearest millimeter. It thus allows the laying of raised tiled terraces.

With good ground preparation, the pot can easily be adapted to different substrates: gravel, grass, earth or concrete. Intended for laying tiled terraces, the adjustable pedestal for slab makes your task much easier as it is simply laid on flat ground without adding any fixings!


Quick and easy to install

All you need to make your project a reality is the adjustable pedestal for slab. No additional products are required, no professional help is required, and the installation of the slab on adjustable pedestal is done alone (except for carrying the slabs to avoid any injury) and quickly. Your terrace will take shape in only 3 days! This very quick and simple way of laying the foundations allows professionals in the trade to be more efficient in the laying of terraces. Individuals, on the other hand, greatly appreciate the ease of handling and the very accessible installation.

There are 3 steps to follow to create a terrace on adjustable pedestal:


  1.        After preparing the ground, lay the pedestals directly on the stable ground without any fixing. Then adjust the height of each pedestal, taking into account the height to be caught up. Located under the head of the pedestal, the adjustment ring allows you to adjust the height to the nearest millimeter for perfect flatness and a longer service life;
  2.        Use a spirit level to check that your installation is straight;
  3.        Lay the slab on pedestal (minimum 2 cm thick) on the head of the adjustable pedestal terrace. The 4 lugs on the head help keep the slab in place and delimit the spacing between each slab. Don't worry, each pedestal supports up to 1 ton of load. There is no need to glue or add joints, the weight of the slabs compacts the entire foundation.


Resistant and durable

The space between the floor and the slabs created by the slab terrace on adjustable pedestal is beneficial for the durability of the structure. Indeed, this space allows air to pass through and therefore ventilates the construction. In addition, the pedestalincludes a rainwater drainage system to avoid stagnation, a risk that could lead to deterioration of the structure. Finally, you can hide all your wires and pipes that make your exterior look ugly.

Reusable indefinitely, the adjustable pedestal for terrace is made of polypropylene, a very solid material that resists not only time, weight and weather conditions. Frost, UV rays and extreme temperatures do not damage the adjustable pedestal, which is a reliable, durable and safe product.

The steps of installation a terrace on pedestals

The installation of a terrace on a pedestal is the easiest and quickest method to set up: follow the assembly steps and build your terrace in less than 3 days!


step 1Determine the required spacing, place the pedestals on the ground, adjust them and check everything with a spirit level.

step Once the installation is level, place the tiles on the head of the pedestals.

step 3Then adjust the height of the pedestals and check everything one last time with a spirit level.

step 4Finally, make the cuts to close the terrace laterally.

Installation of the pedestals
Installation of slabs on pedestals
Adjusting the pedestals
Finishing the terrace
Data sheet

Model : 

adjustable pedestal 90/150 mm for stone floor, duckboards - Rinno Plots

Warranty2 years warranty, 10 years warranty
OriginManufactured in France
ConformityIn compliance with the DTU 43.1 and 51.4
ResistanceResisting the acid and basic solutions, the atmospheric agents, the temperatures between -40°C and 60°C
LoadResisting the test of crushing with load superior in 1 ton
BrandRinno plots
Adjustable height3.54 to 5.91 in
Compatibility with extensionNo
SH Code39259010
Country of OriginUE
Épaisseur écarteur3 mm
Find all the documents that will be useful to you for the realization of your projects

Plot dalle 90:150 - RINNO

Plot dalle 90:150 - RINNO_en


pedestal 90:150 - RINNO

pedestal 90:150 - RINNO_en


Click on a thumbnail to load the video

View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
  • No inducements have been provided for these reviews
  • Reviews are published and kept for a period of five years
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
  • The reasons for deletion of reviews are available here.

4.8 /5

Based on 111 customer reviews

  • 1
  • 2
  • 3
  • 4
  • 5
Sort reviews by :

Olivier L. published the 06/06/2022 following an order made on 22/05/2022


Super produit.

Yendy C. published the 06/06/2022 following an order made on 19/05/2022



Daniel D. published the 27/05/2022 following an order made on 14/05/2022



Stéphane D. published the 16/05/2022 following an order made on 03/05/2022



Wilfried F. published the 12/05/2022 following an order made on 27/04/2022


Fait le job

Olivier L. published the 02/05/2022 following an order made on 19/04/2022


Correspond à mon usage

Jeremie M. published the 13/04/2022 following an order made on 03/04/2022


Très bien bon rapport qualité prix

David G. published the 23/03/2022 following an order made on 10/03/2022


bon produit, solide

Get advice from our experts!

Sign up now
to our newsletter

English (United Kingdom)
Change language