You cannot place a new order from your country. United States

Self-leveling pedestal 50/65 mm for slabs, tiles or ceramics - Rinno Plots


Reference : RIN025040DAUT

Available stock

Best price guaranteed

shipment in 24/48h
Your orders are shipped
Customer service
Our teams are at your disposal from Monday to Friday from 9am to 6pm
D.T.U. Standards
All our products comply with current standards
secure payment
Our site is protected by an SSL certificate
the guarantees

50/65 mm Self-levelling pedestal for terrace slab by Rinno Plots

Laying your terrace on pedestals has many advantages. Contrary to traditional techniques which require a heavy preparation of your ground, often including the use of rather consequent and expensive equipment, the installation on pedestals does not require anything of all that. You no longer need to prepare your ground in a complicated way and sometimes wait up to a month before laying your slab terrace on pedestals after the preparation of your ground. The entire preparation is simplified and requires only 3 simple steps that you can carry out yourself.

The second advantage lies in the fact that you can lay your terrace slab on pedestals on any type of support. Whether it is grass, earth, concrete or even on the surface of an existing terrace.

Laying slab terrace on pedestals will save you a considerable amount of time. All you have to do is lay the pedestals for terrace on the ground without any fixing. The weight of the slab terrace on pedestals will keep the pedestals on the ground. This also gives you a great deal of flexibility. If you want to enlarge or reduce the size of your slab terrace on pedestals after the installation of your terrace, this will be possible very easily. All you have to do is remove or add the pedestals and slabs.

By adopting the technique of slab installation on pedestals, your installation will be quick and easy. In less than 3 days, you will be able to obtain a beautiful terrace with slabs or tiles on pedestals without any difficulty. Only 4 steps are needed to install your slab terrace on pedestals.


Features and benefits of the 50 - 65 mm self-levelling slab pedestals or tile pedestals

  •          The slab or tile terrace on pedestals have an adjustment ring located under the head of the pedestal that allows for millimeter-accurate adjustment. The height is variable from 50 to 65 mm, thus adapting perfectly to all your projects.
  •          Slab pedestals are self-levelling. They are equipped with a disc at their base allowing them to compensate for up to 5% slope over 1 m. Thus, they are perfectly adapted to sloping or non-levelled ground.
  •          Respectful of the environment, the adjustable pedestals for terraces are made in France. In addition, they are made of filled polypropylene, a 100% recyclable material.
  •          You won't have to worry about the weight of your slabs or tiles. The pedestals for terrace can support up to 1 ton of load per pedestal. This means you can design your terrace as you wish.
  •          Raising your slab terrace on pedestals allows rainwater to drain away so you won't have a problem with water stagnation in case of heavy rains. The creation of a slope will not be necessary either to avoid the accumulation of water.
  •          When you install your slabs on pedestals, you make sure that you have a site that complies with standards. In fact, the slabs pedestals comply with standards DTU 43.1 and 51.4.
  •          You can place your trust in our range of pedestals for terrace. The guarantee is 10 years, thus testifying to their high quality and robustness.
  •          Hot summer days or periods of extreme cold that cause frost in winter will not worry you. Indeed, the slabs pedestals are resistant to temperature variations from -30 to +60° and to atmospheric agents.
  •          Moreover, whatever the environment in which you wish to install your slab terrace on pedestals, you should know that the pedestals are resistant to acid solutions and chemical products. You will have nothing to fear about a possible deterioration of your terrace.




Tips for installing a slab terrace or tiling on pedestals

Preparing the ground for a terrace on pedestals

If your lot is in a concrete slab, you don't have to do anything, you can proceed directly to the installation. If your ground is grass, earth or any surface that is not stable, a small three-step preparation is necessary. First, you will proceed with a 15-cm-deep grading, then you will lay a geotextile felt to prevent weeds from growing on your paving deck on pedestals. Finally, you will cover with 15 cm of gravel and compact it to obtain a stable surface.


Laying slab or tiles on pedestals

First, arrange the pedestals according to the size of the slab. Add a soundproofing shim to ensure sound insulation of the surface. Then adjust the slab pedestals to the desired height. Then simply place the slab or tiles on the lugs provided for this purpose, which will allow the slab to be stabilized. Once this step has been carried out, make sure that your slab terrace on pedestals is perfectly level using a spirit level.


Finishing your terrace slab or tile on pedestals

Finally, make the necessary cut-outs to make the lateral closure of the terrace. You will be able to use a cladding support and a slab plate.

The steps of installation a terrace on pedestals

The installation of a terrace on a pedestal is the easiest and quickest method to set up: follow the assembly steps and build your terrace in less than 3 days!


step 1Determine the required spacing, place the pedestals on the ground, adjust them and check everything with a spirit level.

step Once the installation is level, place the tiles on the head of the pedestals.

step 3Then adjust the height of the pedestals and check everything one last time with a spirit level.

step 4Finally, make the cuts to close the terrace laterally.

Installation of the pedestals
Installation of slabs on pedestals
Adjusting the pedestals
Finishing the terrace
Data sheet

Model : RIN025040DAUT

Self-leveling pedestal 50/65 mm for slabs, tiles or ceramics - Rinno Plots

Warranty10 years warranty
OriginManufactured in France
ConformityIn compliance with the DTU 43.1 and 51.4
ResistanceResisting the acid and basic solutions, the atmospheric agents, the temperatures between -40°C and 60°C
LoadResisting the test of crushing with load superior in 1 ton
BrandRinno plots
TypeAdjustable, Self-levelling
Adjustable height1.97 to 2.56 in
Compatibility with extensionNo
SH Code39259010
Country of OriginUE
Épaisseur écarteur3 mm
Find all the documents that will be useful to you for the realization of your projects

auto dalle 50:65 - RINNO

auto dalle 50:65 - RINNO_en


Click on a thumbnail to load the video

View the trust certificate
  • For further information on the nature of the review controls, as well as the possibility of contacting the author of the review please consult our CGU.
  • No inducements have been provided for these reviews
  • Reviews are published and kept for a period of five years
  • Reviews can not be modified: If a customer wishes to modify their review then they can do so by contacting Verified Reviews directly to remove the existing review and publish an amended one
  • The reasons for deletion of reviews are available here.

3.9 /5

Based on 10 customer reviews

  • 1
  • 2
  • 3
  • 4
  • 5
Sort reviews by :

CLAUDE JEAN A. published the 04/09/2021 following an order made on 17/08/2021


très utile sur sol imparfait

LAURENT D. published the 16/08/2021 following an order made on 02/08/2021


Bien montage facile et rapide, il faut juste savoir se servir d'un niveau .

William Q. published the 26/03/2021 following an order made on 26/02/2021



Nadège B. published the 15/11/2020 following an order made on 31/10/2020


fragilité des ailettes du dessus du plot si bien que lorsque votre commande arrive plus d'un quart des produits sont cassés...

Comment from the 10/11/2020
Bonjour, Merci de nous envoyer un mail à

Jean P. published the 24/09/2020 following an order made on 12/09/2020


Le produit est conforme, en vrac dans la boîte . Un peu le bazar pour tout reconstituer et compter .

Francois O. published the 24/09/2020 following an order made on 20/08/2020


Pas de soucis bien adapté

Anonymous A. published the 21/06/2020 following an order made on 26/05/2020



Anonymous A. published the 06/05/2020 following an order made on 20/04/2020


support s'adaptant sur les plots standard c'est la base qui dispose de la fonctionnalité autonivelante.

Get advice from our experts!

Sign up now
to our newsletter

English (United Kingdom)
Change language