Self-levelling disc for terrace pedestal + 25 mm - Rinno Plots
The self-levelling disc is an accessory used for laying terrace on pedestals on sloping or uneven ground. The use of this accessory makes it possible to create or catch up to 5% of slope over 1 meter. It is compatible with pedestals for joist as well as with pedestals for tiled terraces. Simple to use, add the disc only where you need it: it clips under the pedestal with the snap of a finger.
Use of the self-levelling disc for terrace pedestals
This accessory is particularly useful when laying terraces on unlevelled or slightly sloping ground: the saucer-shaped base allows the ground to be re-balanced so as to obtain a level surface. In this way, you can create a slope or make up the slope of your ground to a height of 5% over 1 meter.
The self-levelling disc can only be used with pedestals for joists and slabs by Rinno Plots. By placing the self-levelling disc under the pedestal, you add 25 mm to the final height of your pedestal.
Place the self-levelling disc directly on the ground and fit the pedestal over it: it is instantly fixed with a clip system. No tools are required, all you have to do is adjust the height of your pedestals for terrace using the adjustment ring under the head of the pedestal. Make sure that your installation is level and then lay your siding on the pedestals: wooden deck boards or exterior tile for pedestal.
Characteristics of the self-levelling disc for terrace on pedestals
The self-levelling disc Rinno Plots has the same properties as the brand's pedestals for terrace. Thus, the disc withstands temperature variations to face harsh winters as well as arid summers without fear, it is frost resistant and UV rays do not damage it. Moreover, made in France, this accessory for the installation of terrace on sloping ground meets the standards in force called DTU 43.1 and 51.4.
Model : RINDISQAUT
Self-leveling disk for Rinno pedestal - Rinno plots
|Warranty||2 years warranty|
|Origin||Manufactured in France|
|Conformity||In compliance with the DTU 43.1 and 51.4|
|Resistance||Resisting the acid and basic solutions, the atmospheric agents, the temperatures between -40°C and 60°C|
|Country of Origin||UE|
|Épaisseur écarteur||3 mm|
Find all the documents that will be useful to you for the realization of your projects
Click on a thumbnail to load the video
Jérémie B. published the 18/09/2021 following an order made on 01/09/2021
CLAUDE JEAN A. published the 04/09/2021 following an order made on 17/08/2021
très utile sur sol imparfait
Patrick P. published the 29/08/2021 following an order made on 09/08/2021
Philippe G. published the 01/06/2021 following an order made on 25/05/2021
CHRISTOPHE E. published the 18/04/2021 following an order made on 02/04/2021
Rien à signaler, en attente d'utilisation d'ici quelques jours.
Hervé B. published the 28/02/2021 following an order made on 19/02/2021
Compense bien les irrégularité de pente.
Serge H. published the 15/12/2020 following an order made on 09/12/2020
conformes et satisfait
William R. published the 13/10/2020 following an order made on 01/10/2020
Réellement utile et efficace.