The black Vérindal slab plate perfects the look of your terrace on pedestals. Made in France, it measures 195 x 195 mm and weighs 161 g. It sits on the head of the slab pedestal to support the slab along a wall, at an edge or in a corner, and creates the side finishes with cladding. It suits slabs at least 2 cm thick and adds approximately 13 mm of height on the pedestal head. It withstands frost down to -20°C and UV up to +80°C.
Orders shipped within 24/48 hours
Best prices
Pay in 3 or 4 installments with Oney
Slab plate for terrace pedestal, Black, Vérindal+
Perfect finishes for edge slabs
The black Vérindal+ slab plate is a finishing accessory that perfects the look of your terrace on pedestals. It sits on the head of the pedestal to support the slab along a wall, at an edge or in a corner.
Made in France.
|
Black
An attractive finish at the edge of the terrace
|
195 x 195 mm
Surface of the plate, placed on the pedestal head
|
+ 13 mm
Height added by the plate, approximately
|
|
2 cm min
Required slab thickness
|
161 g
Weight of the plate
|
-20°C / +80°C
Resistance to frost and UV
|
On a slab terrace laid on Vérindalpedestals, edge slabs need suitable support. The slab plate is placed on the head of the pedestal and gives the slab a clean seat.
It is used along a wall to support the slab placed against the wall, as well as on the edges and corners of the terrace, to create the side finishes with cladding.
Slab thickness: 2 cm minimum
Slab plates and fixing kits are designed for slabs at least 2 cm thick. The plate adds approximately 13 mm of height on the pedestal head: remember to include it in your calculation.
The slab plate sits on the head of the Vérindal+ slab terrace pedestals of the H range, from H50 to H150.
|
Slab terrace pedestals (H range)
from 50 to 260 mm
|
| Dimensions | 195 x 195 mm |
| Height added | Approximately 13 mm |
| Weight | 161 g |
| Colour | Black |
| Resistance | Frost down to -20°C, UV up to +80°C |
| Compatibility | Vérindal+ slab terrace pedestals, except low models (10 mm, 8/20 mm, 20/30 mm) |
| Manufacturing | Made in France |
|
Along a wall
It supports the slab placed against the wall, for regular laying right up to the edge of the terrace.
|
Edges and corners
It is used for the side finishes of the terrace, at the edges and in the corners, with cladding.
|
|
1. Locate the edge pedestals
Identify the pedestals located along the wall, at an edge or in a corner of the terrace.
|
2. Place the plate
Set the slab plate on the head of the pedestal.
|
3. Lay the slab
Place the slab on the plate, then continue laying your terrace.
|
It supports the slab along a wall, at the edges and in the corners of the terrace, and perfects the look of the finish of a terrace on pedestals.
With Vérindal+ slab terrace pedestals, except low models (10 mm, 8/20 mm and 20/30 mm).
Slabs must be at least 2 cm thick to use the slab plates and fixing kits.
Placed on the head of the pedestal, it adds approximately 13 mm of height, to be taken into account in the calculation of the total height.
Reference: JOU-IPFIN70JAS20000