Tiles for Terrace- Quartziti 2.0 Waterfall
Mirage's Quartziti 2.0 tiles are outdoor ceramic tiles that enhance the heterogeneity of stone. With its deep shades and its rugged appearance, Quartziti 2.0 tiles are authentic. Its light gray color gives it a chic and contemporary look. Each tile measures 60 x 120 cm and is 20 mm thick, ideal to build an exceptional outdoor terrace on pedestals.
Mirage porcelain stoneware tiles for terrace
Mirage outdoor tiles are made of porcelain stoneware, a noble material that's a blend of pure minerals, kaolinite, feldspars, and clay. This mixture is enhanced with natural colors to make Mirage tiles look stunning. These materials are compacted without adding any glue or resin. Really natural, Mirage porcelain stoneware tiles are also ecological! They do not contain any varnish, resin or chemical waterproofing agent.
These through body tiles are of high quality, resistant, and aesthetically pleasing. Porcelain stoneware is resistant and impervious to acids, dirt, and freezing temperatures. These porcelain stoneware tiles are also slip, abrasion and shock-resistant.
They comply with the EN14411 and ISO13006 standards and are high quality tiles. Mirage porcelain stoneware guarantees your safety at all times thanks to its slip-resistant properties. Our porcelain stoneware tiles meet category 11 and 12 slip resistance standards and therefore have a high grip.
Technical characteristics of Mirage Quarziti 2.0 outdoor tiles
- Length: 120 cm
- Width: 60 cm
- Thickness: 2 cm
- Stone effect
- Material: porcelain stoneware
- Rectified edge finish
- Slip-resistant surface finish
- Footwear slip-resistance standard R11
Method to install them on pedestals
Installing tiles on pedestals, it's very easy and fast! Start by laying the pedestals on the ground, then put a vibration buffer on the head of the pedestals and finally place the porcelain stoneware tiles on the latter.
Your terrace is ready to be used!
The installation of a terrace on a pedestal is the easiest and quickest method to set up: follow the assembly steps and build your terrace in less than 3 days!
step 1Determine the required spacing, place the pedestals on the ground, adjust them and check everything with a spirit level.
step Once the installation is level, place the tiles on the head of the pedestals.
step 3Then adjust the height of the pedestals and check everything one last time with a spirit level.
step 4Finally, make the cuts to close the terrace laterally.
Model : SD72-QR03-60120
Outdoor porcelain stoneware tiles 60x120X2 cm QUARZITI 2.0 WATERFALL - Mirage
|Made in Italy
|Porcelain stoneware tiles
|60 cm x 120 cm
|R11: Medium adhesion + (perfect for outdoor terraces or for terraces near a body of water)
|Different shades of tiles
|V2 : slight variation
|Mirage adheres to the IPPC. Integrated pollution prevention and control protocol, which certifies compliance with specific parameters and the use of the best existing techniques in industrial processes for the reduction of polluting emissions.