Tiles for terrace - NooN Ember
Mirage’s NooN ceramic tiles look like wooden flooring. Each slab measures 19,7 X120 cm, this outdoor tile imitates the appearance of natural wooden slabs with the warm shades of slightly gray wood. It is perfect to build a modern and practical terrace on pedestals. Each slat measures 19,7 X 120 cm and is 20mm thick, NooN ceramic tiles are ideal to build an exceptional outdoor terrace.
Mirage porcelain stoneware tiles for terraces on pedestals.
Mirage slabs are made of a top of the range, compact and low porosity material. This extraordinary porcelain stoneware is composed of 99% pure materials such as minerals, kaolin, feldspar and clay. This noble composition is embellished with natural colors for an excellent aesthetic rendering.
Mirage porcelain stoneware is an excellent natural material, compressed without the addition of glue or resin. Completely colored and fired at more than 1250°, the fine stoneware slabs are homogeneous and compact. Extremely resistant, Mirage outdoor slabs are impervious to acids, dirt, and freezing temperatures. Its vitrified structure is waterproof and slip resistant, resistant to wear and fire.
In addition, Mirage’s porcelain stoneware is an eco-friendly product. It does not contain any chemical waterproofing agents, varnishes or resins. These high end outdoor tiles are fabricated with the utmost respect for the environment.
Technical characteristics of outdoor Mirage NooN tiles
- Length: 120 cm
- Width: 30 cm
- Thickness: 2 cm
- Wood effect
- Material: porcelain stoneware
- Rectified edge finish
- Anti-slip surface finish
- R11 slip resistance standard
Method to install your porcelain stoneware tiles on the Cross slab stabilizing spacers from Jouplast
These porcelain stoneware tiles come in a 19.7 x 120 cm format , they are very thin, which means they cannot be installed on traditional terrace tile pedestals. Only the Cross slab stabilizing spacers are compatible with these dimensions.
However, the installation method is still simple: lay your Cross slab stabilizing spacers on the ground, leaving a space of 19.7 cm in the first row. Then go back 120 cm and repeat the process. Finally simply place your porcelain stoneware planks on top of the spacers and that’s it!
The installation of a terrace on a pedestal is the easiest and quickest method to set up: follow the assembly steps and build your terrace in less than 3 days!
step 1Determine the required spacing, place the pedestals on the ground, adjust them and check everything with a spirit level.
step Once the installation is level, place the tiles on the head of the pedestals.
step 3Then adjust the height of the pedestals and check everything one last time with a spirit level.
step 4Finally, make the cuts to close the terrace laterally.
Model : SZ57-NN02-19-7120
Outdoor porcelain stoneware tiles 19,7x120x2 cm NOON EMBER - Mirage
|Origin||Made in Italy|
|Use||Porcelain stoneware tiles|
|Tile size||19,7 cm x 120 cm|
|Tile slippage||R11: Medium adhesion + (perfect for outdoor terraces or for terraces near a body of water)|
|Different shades of tiles||V2 : slight variation|
|Environmentally friendly||Mirage adheres to the IPPC. Integrated pollution prevention and control protocol, which certifies compliance with specific parameters and the use of the best existing techniques in industrial processes for the reduction of polluting emissions.|