85/115 mm Self-levelling pedestal for slab by Rinno Plots
The Rinno Plots range of pedestals for terrace offers you the possibility of having an outdoor tiled terrace at a lower cost, without the need for long and tedious work. Your slabs terrace on pedestals can be ready in less than 3 days!
How is this possible? Laying a terrace on pedestals differs from the other much more restrictive methods that you can find to install your terrace. Indeed, the use of pedestals for slabs has many advantages.
Advantages of pedestals for slabs terrace.
Simplified site preparation for laying on pedestals for terrace
To proceed with the installation of your slab terrace on pedestals, you will not need to pour a concrete slab, which will require waiting a month after preparation before you can lay your deck. Nor will you need to use glue mortar or an industrial vacuum cleaner to ensure that your lot is free of imperfections. Thanks to the pedestals for slab or tile decks, preparation is very easy.
If your floor is a concrete slab or an old terrace, then you won't have anything more to do before laying. However, on soil or grass, relatively unstable surfaces, you will need a little preparation. You will need to dig 15 cm deep and then cover it with a geotextile felt to prevent weeds from invading. Finally, 15 cm of gravel must be covered and compacted to provide a stable surface. In just 3 steps, your floor is ready for the installation of your slab terrace on pedestals.
Adaptation of the pedestals to all supports
Slabs pedestals can be placed on any support. Concrete, grass, earth or even an old terrace, the pedestals for terrace will adapt to any environment.
A terrace on pedestals: quick and easy installation
Only four steps are required to install your slab terrace on pedestals. After preparing your site, the first step is to simply lay the pedestal for terrace on the ground at the right distance. The distance between each pedestal depends on the size of the slab.
Once you have the desired height for all the pedestals, lay the slabs or terrace tiles on top of the head of the pedestals. Each pedestal has 4 lugs to hold the slab or flooring in place. Tip: add a damping wedge on each pedestal to reduce vibration and noise.
Finally, you can make the cut-outs for the lateral closure of the terrace. For the final additions, use the covering support and the slab plate, they help to keep the slabs terrace vertical. There is no need to pour joints.
Rinno slab pedestal: resistant and long-lasting
The pedestals for terrace are made of polypropylene, a recyclable but also very resistant material. Indeed, each pedestal can support up to one ton of load. It is resistant to atmospheric agents such as frost or UV rays, to acid and basic solutions, and can withstand temperature variations from -30° to +60°.
The pedestals for tile or slab have a perforated base that allows rainwater to drain off. You no longer need to create a slope on your property for water drainage. The fact that the finishes do not require joints also allows rainwater to run off easily, thus maintaining your terrace over time and avoiding, for example, the formation of unpleasant odors due to the stagnation of rainwater.
Technical characteristics of the adjustable slab pedestals for self-levelling terraces 85-115 mm
- Slabs pedestals have a variable height from 85 to 115 mm thanks to an adjustment ring located under the head of the pedestal.
- The pedestals for terrace are self-levelling thanks to a 25mm high disc located on the head of the pedestal. The discs can be used to create or compensate for a slope of up to 5%. They are therefore ideal for use on sloping or poorly levelled ground.
- The pedestals for terrace are guaranteed for 10 years.
- The pedestals comply with DTU 43.1 and 54.1 standards, which guarantees that your work will be carried out in accordance with the rules.
Model : RIN060090DAUT
Self-leveling pedestal 85/115 mm for slabs, tiles or ceramics - Rinno Plots
|Warranty||10 years warranty|
|Origin||Manufactured in France|
|Conformity||In compliance with the DTU 43.1 and 51.4|
|Resistance||Resisting the acid and basic solutions, the atmospheric agents, the temperatures between -40°C and 60°C|
|Load||Resisting the test of crushing with load superior in 1 ton|
|Adjustable height||3.35 to 4.53 in|
|Compatibility with extension||No|
|Country of Origin||UE|
|Épaisseur écarteur||3 mm|
Find all the documents that will be useful to you for the realization of your projects
Click on a thumbnail to load the video
LAURENT D. published the 16/08/2021 following an order made on 02/08/2021
Bien montage facile et rapide, il faut juste savoir se servir d'un niveau .
William Q. published the 26/03/2021 following an order made on 26/02/2021
Francois O. published the 24/09/2020 following an order made on 20/08/2020
Pas de soucis bien adapté
BENOIT R. published the 18/05/2020 following an order made on 15/04/2020
Pratique et facile d'utilisation
MICHEL M. published the 18/05/2020 following an order made on 15/04/2020
Comment from Plots-discount.com the 13/05/2020
je ne comprend pas ce que vous voulez dire?
Anonymous A. published the 06/04/2020 following an order made on 27/03/2020
Anonymous A. published the 31/08/2019 following an order made on 19/08/2019