• Reduced price
Plot de terrasse fixe 10 mm dalle - Solidor
  • Plot de terrasse fixe 10 mm dalle - Solidor
  • Plot de terrasse fixe 10 mm dalle - Solidor
  • Plot de terrasse fixe 10 mm dalle - Solidor
  • Plot de terrasse fixe 10 mm dalle - Solidor
  • Plot de terrasse fixe 10 mm dalle - Solidor
  • Plot de terrasse fixe 10 mm dalle - Solidor

Fixed Slab Pedestal 10 mm – Solidor

SOL-003237
Solidor

Solidor 10 mm fixed pedestal on a polyurethane base with recycled rubber granulate. Precise height, vibration absorption, and integrated membrane protection. Compatible with the Solidor Comfort range. Made in Belgium.

More details
 

Orders shipped within 24/48 hours

 

Best prices

 

Pay in 3 or 4 installments with Oney

€1.06
€0.90 Save 15%
Tax included
Product available for orders
Quantity

Promotion ends in:
0Days
0Hours
0Minutes
0Seconds
Description
🇧🇪 Made in Belgium – Solidor
Fixed 10 mm Tile Pedestal – Solidor

The Solidor 10 mm fixed monoblock pedestal is the ultimate ultra-low solution for installing tiles with minimal clearance height. It provides a solid base and allows for immediate drainage, with no mechanical adjustment required.

📐 Strict 10 mm height Constant level, 100% incompressible
💧 Continuous drainage Rapid water evacuation under the tile
🚫 Monoblock pedestal Not compatible with risers
🌡️ −25°C to +70°C Resistant to extreme climatic variations
♻️ 100% Recyclable Environmentally friendly polypropylene
🔧 Instant installation Place directly on a flat surface

Solidor 10 mm fixed pedestal: the ally for ultra-tight spaces

When installing terraces, every millimeter counts. When faced with a flush door threshold or a renovation on an old screed that allows almost no elevation, the 10 mm fixed pedestal is the thinnest technical solution on the market. Its monoblock structure ensures perfect stability without any risk of sagging.

By creating a crawl space of just 1 cm, this pedestal is sufficient to separate your tiles or stone slabs from the load-bearing floor. This small space is essential: it allows rainwater to drain, promotes air circulation for quick drying, and protects your coverings from damage related to frost or rising damp.

Discover professional Solidor quality

Official Solidor video (global presentation of the brand's expertise).

Detailed technical specifications

Pedestal type Fixed monoblock pedestal (non-adjustable)
Total height 10 mm
Riser compatibility Not compatible with risers
Material High-quality injected polypropylene (PP)
Integrated spacers Yes (maintains joint spacing between tiles)
Mechanical resistance High resistance to crushing and aging
Thermal resistance From −25°C to +70°C
Usage Exclusive outdoor use (terraces, balconies)
Manufacturing Belgium (Solidor)
⚠️ Important reminder: Unlike adjustable pedestals, this 10 mm ultra-low fixed model cannot accept extensions (risers). It is designed to be used alone on a surface that is already level.

In what situations should you use this 10 mm fixed pedestal?

🏠 Flush door threshold
The absolute minimum height to avoid obstructing exterior doors.
🔄 Direct overlay
Effortless installation over existing tiles while limiting total added thickness.
🏢 Narrow loggias
Perfect for renovating small outdoor spaces without creating a "step" at the entrance.
🏗️ Flat roof terraces
Creating a drainage-capable floor as close as possible to the building's waterproofing.

Steps for installing the Solidor 10 mm fixed pedestal

This ultra-thin pedestal is installed with a simple gesture. Its effectiveness will depend primarily on the quality of the surface it supports.

  • 1. Check the surface: Check the flatness of your floor (concrete slab or old covering) and ensure there is a drainage slope (approx. 1%).
  • 2. Layout: Place a 10 mm pedestal under each corner of your tiles (i.e., 4 pedestals per tile). If your tiles exceed 60 x 60 cm, systematically position an additional pedestal under the center of the tile.
  • 3. Installation: Simply fit your tiles against the pedestal's spacer fins. Installation is done dry, without glue or grouting.

Frequently Asked Questions

Does this 10 mm fixed pedestal accept Solidor F30 risers?
No, it is impossible to add risers to this model. The 10 mm fixed pedestal is a monoblock piece specifically designed for projects requiring constant, ultra-low height.
Is it possible to stack two 10 mm pedestals to reach 20 mm?
Stacking fixed pedestals is prohibited, as it would inevitably lead to dangerous instability of your terrace. For heights from 17 mm and up, it is advisable to look at the range of Solidor adjustable pedestals.
How do I adjust a tile if my floor is not perfectly straight?
Since the pedestal is fixed, it will not compensate for large differences in level. However, to correct minor flatness defects (1-2 mm), you can add ultra-thin EPDM damping shims directly onto the head of the relevant pedestal.
How many 10 mm pedestals should I calculate per square meter?
For a classic installation with 60 x 60 cm tiles, the average is 4 to 5 pedestals per m² (counting perimeter cuts). Be sure to add a pedestal under the center of the tile if its dimensions exceed 60 cm.
Product Details
SOL-003237
New

Data sheet

Adjustable height
Fix 10 mm
Brand
Solidor
Acoustic damper included
Yes
Installation surface
Loose soil
Type of setting
Manual
Decking pedestal
Tile
Height
From 1 to 2 cm

Specific References

EAN13
5407010090178
16 other products in the same category: