345-385 mm Europlot adjustable pedestal for slab terrace
What better way to fully enjoy your outside than to install a terrace in your garden? Choosing the method of installation on a pedestal for terrace is a simple, quick and inexpensive way to lay an outdoor tiled terrace.
The Europlot slab pedestal is designed for the installation of terrace in porcelain stoneware slab, concrete slabs or gratings. The slab is adjustable from 345 to 385 mm, allowing you to adjust its height according to the needs of your site.
Characteristics of the pedestal for slab adjustable from 345 to 385 mm
EUROPLOT pedestals have a different adjustment system from the other pedestals: the height adjustment is carried out after the installation thanks to the tool holder and the adjustment wrench. This method makes it possible not to have to dismantle your terrace and to be able to adjust your pedestals at any time.
On the head of the pedestal, 4 lugs allow the correct support of the slab and to define the spacing between each tile. In fact, laying on pedestals is a technique that does not require the creation of a joint between the tiles. Saving time and maintenance, the slab pedestal is practical and easy to use.
The EUROPLOT slab pedestal is only compatible with accessories of the same brand. Please note: the 345/385 mm slab pedestal is not compatible with the 12 mm extension. However, you can add up to 6 x 40 mm extensions to this pedestal to obtain a final height of 625 mm. Thus, thanks to your raised terrace, you can hide the pipes and electrical cables of the garden under the structure to preserve the aesthetics of your exterior.
The EUROPEDESTAL slab is resistant and durable.
Made of polypropylene, the slab pedestal supports up to 500 kilos of load without sagging. Moreover, it is resistant to acid and basic products so that it can be installed around a pool. Finally, it withstands temperature variations from -30° to +60° to guarantee resistance in all seasons. Thus, EUROPLOT’s pedestals are guaranteed for 2 years.
The installation of a terrace on a pedestal is the easiest and quickest method to set up: follow the assembly steps and build your terrace in less than 3 days!
step 1Determine the required spacing, place the pedestals on the ground, adjust them and check everything with a spirit level.
step Once the installation is level, place the tiles on the head of the pedestals.
step 3Then adjust the height of the pedestals and check everything one last time with a spirit level.
step 4Finally, make the cuts to close the terrace laterally.
Adjustable pedestal 305 345 mm for slabs, tiles or ceramics
|Warranty||2 years warranty|
|Origin||Manufactured in France|
|Conformity||In compliance with the DTU 43.1 and 51.4|
|Resistance||Resisting the acid and basic solutions, the atmospheric agents, the temperatures between -30°C and 60°C|
|Load||Resisting the test of crushing with load superior in 500 kg|
|Type||Adjustable by the top, Adjustable|
|Use||Gratings, Carrelage stoneware, Concrete slab|
|Adjustable height||13.58 to 15.16 in|
Find all the documents that will be useful to you for the realization of your projects
03/01/2017 Arnaud P.