×

Subscribe to our newsletter!

Get 5% off your next order by signing up.

Adjustable pedestal 80 140 mm for slabs, tiles or ceramics - Jouplast
  • Adjustable pedestal 80 140 mm for slabs, tiles or ceramics - Jouplast
  • Adjustable pedestal 80 140 mm for slabs, tiles or ceramics - Jouplast
  • Adjustable pedestal 80 140 mm for slabs, tiles or ceramics - Jouplast
  • Adjustable pedestal 80 140 mm for slabs, tiles or ceramics - Jouplast
  • Adjustable pedestal 80 140 mm for slabs, tiles or ceramics - Jouplast
  • Adjustable paving terrace pedestal 80/140 mm - ESSENTIEL range - Jouplast

Adjustable paving terrace pedestal 80/140 mm - ESSENTIEL range - Jouplast

JOU-IH080140DS10000
JOUPLAST

Adjustable pedestal for pavings from 80 to 140 mm. Adjustment to the millimeter thanks to the ring located under the head of the pedestal. Designed terraces with concrete pavings , outdoor tiles or duckboards. Place 1 pedestal at each corner of the paving. Supports up to 1 ton of load. Resistant to frost, UV, extreme temperatures as well as acid and basic products. Complies with current DTU 43.1 standards. French made. For more comfort, and to avoid vibrations, consider acoustic rubbers.

More details
 

Expédition des commandes en 24/48h

 

Livraison offerte dès 500€

 

Paiement en 3 ou 4x avec Oney

 

Service client du lundi au vendredi

Meilleur prix garanti
€2.00
Available equivalent
Packaging
Quantity

Calculate quantities
You might also like
Description
Dessin technique du plot terrasse dalle Essentiel 80/140 mm de Jouplast

Pedestal for tiled terrace adjustable from 80 to 140 mm - Jouplast

The Jouplast Essential paving terrace pedestal is an adjustable pedestal from 80 to 140 mm which perfectly adapts to the desired height. This paving pedestal is designed to accommodate a terrace made of concrete paving, outdoor tiles, porcelain stoneware and gratings. To meet the requirements of both individuals and professionals, Jouplast has designed a paving pedestal that is easy to handle and simple to install!

The advantages of the Jouplast 80/140 mm paving terrace pedestal

  • Speed and ease of installation
  • Installation without fixing or joint
  • Manual and precise height adjustment thanks to the blue nut
  • Frost and UV resistant
  • Allows air to circulate under the structure
  • Allows the passage of cables and pipes
  • Withstands more than a ton of load
  • Complies with DTU 43.1

Tips for laying a tiled terrace on pedestals

  • The paving terrace pedestal is intended for outdoor and pedestrian use
  • Provide an inclination of 1 cm per linear meter to promote the evacuation of rainwater, regardless of the support;
  • It is mandatory to use self-supporting pavings, of class T7 or T11 according to standard NF EN 1339 or F+;
  • Whether the ground is composed of grass, earth, gravel or concrete, the adjustable terrace pedestal can be installed without difficulty provided that the ground is stable and flat.

Steps for laying a terrace on a tiled pedestal

1/ Ground preparation

The implementation is simple and fast. Indeed, before laying the first pedestal for tiling on the ground, it is mandatory to prepare the ground that will accommodate your future terrace. This step guarantees the durability over time of your slab terrace on pedestals. Indeed, on unprepared ground, your terrace on pedestals can move depending on the weight and weather conditions. In order to avoid this, carry out a compliant, fast and economical site preparation!


Here is the necessary for this preparation: 

  • A cord
  • Stakes
  • A spirit level
  • A shovel
  • A tape measure
  • A mason's box screed
  • A geotextile film
  • Gravel


To do this, just follow these instructions to the letter if your terrace is going to come to life on a grass pitch:

  1. Dig the ground for 15 cm;
  2. Place a geotextile felt there to eradicate the growth of weeds and save you additional maintenance;
  3. Fill the hole with a 15 cm layer of gravel;
  4. Compact and make sure everything is level.

Depending on the nature of the ground, a draining foundation may be necessary. To do this, first lay down a layer of 30/60 or 40/80 crushed stone.

If the surface obtained still has some defects, you can make a laying bed with quarry sand or type 0/4 crushed sand.

2/ Lay the pedestals and paving tiles

Getting started with the tiled terrace pedestal is within everyone's reach! No additional tools or heavy earthworks are required. The pedestal is placed directly on the ground without any fixing after having correctly prepared the ground. Laying tiling on pedestals is accessible to all and allows quick and easy construction! Count 1 pedestal per corner, i.e. 4 pedestals for a tiled slab. For slabs from 60 x 60 cm, add one or two central studs by breaking the spacers.


For the installation of pedestals and tiling, follow these 4 steps and get a resistant terrace out of the ground:

  1. Start by positioning the pedestals on the ground following the layout plan that you have previously drawn up. Count 1 pedestal at each corner, i.e. 4 pedestals per slab for dimensions up to 60 x 60 cm. Beyond that, for large format pedestals, provide one or two central blocks, to be positioned by breaking the spacers;
  2. Adorn the head of the studs with an acoustic rubber to avoid vibrations and offer you optimal sound comfort;
  3. Lay the paving tiles against the spacers;
  4. Finally last step: turn the nut to adjust the height of the pedestal to the desired level.

Accessories for laying a tiled terrace on a Jouplast pedestal

  • Extensions for terrace pedestals of 10 mm, 25 mm or 60 mm to increase the final height of the pedestal without changing it
  • The pedestal plate to hold the pedestals against a wall and prevent it from tipping
  • The side cladding support to ensure the maintenance and installation of a skirting board
  • Acoustic rubber to obtain optimal acoustic comfort on the slab terrace by attenuating vibrations
  • The Jouplast slab carrier to move the pedestals without hurting your back.

Technical characteristics

  • Complies with DTU 43.1
  • Load resistance greater than 1 ton
  • Frost and UV resistant
  • Flange diameter: 208 mm
  • Head diameter: 120 mm
  • Adjustable height: 80 to 140 mm

Product Details
JOU-IH080140DS10000
3441290000177

Data sheet

Height
From 8 to 12 cm
From 12 to 15 cm
Color
Black
Material
Polypropylene
Guarantee
2 years warranty
Origin
Manufactured in France
Conformity
Compliance with the DTU 43.1
Resistance
Resistant to acidic and basic solutions, atmospheric agents, temperatures between -30°C and +60°C
Load
Resists the test of crushing with a load superior in 1 ton
Brand
Jouplast
Type
Adjustable
Adjustable height
80 to 140 mm
Qté lot
40
trad_lot
A batch of
SH Code
39259010
Country of Origin
UE
Spacer thickness
3 mm
Best-price
Yes
Installation surface
Loose soil
Type of setting
Manual
Attachments
Download
FT_PLOT HD_FR_2112

FT_PLOT HD_FR_2112_en

Download (722.97KB)
FT_PLOT HL_FR_2112

FT_PLOT HL_FR_2112_en

Download (879.26KB)
16 other products in the same category: